Reptile Fencing

Reptile Fencing Diagram

Reptile Fencing Specifications

Reptile Fencing Fitted Measurements

Reptile fencing panels are installed 225mm vertically below ground, 600mm vertically aboveground and supported with timber stakes (Optional).

Reptile Fencing Fitting Description

The reptile fencing panels are fitted either into a 300 × 50mm slitcreated by a V backed sub soiler or “wiz" plough pulled by a tractor or in a trench excavated using a chain trencher or mini digger. Alternatively, if necessary, the trench is dug by hand.

The preferred method of installing reptile fencing for best results and most efficient fitment is the slitting method, where conditions suit. Once the reptile fencing panels are sited the slit is closed up by driving back along the line of the reptile fence with a tractor, vehicle or compacted by hand. This creates a total seal between the soil and panels, which are fitted to the side of the trench nearest to the relevent population or the inside if a containment area. The reptile fencing panels are overlapped by 50mm then secured by aluminium blind rivets along the overlap joint and supported by stakes. Reptile fencing panels can be cut down or the overlap increased to allow for uneven ground or contours.

HERPETOSURE® reptile fencing is designed to be reusable andrecyclable, it also has a high level of impact resistance, therefore offering a much higher level of boundary security and removing the need to landfill expired fencing materials at the end of the project. ZERO project waste.

Reptile Fencing Technical Data
Density Kg/m3 930
Tensile strength (Mpa) N/mm2 26.0
Elongation at break % 460
Flexural yield strength (Mpa) N/mm2 42.0
Flexural modulus (Mpa) N/mm2 1250
Linear Thermal expansion mm/m/°c 0.150
Surface spread of flame Class 3