Snake Fencing Specifications
- Temporary snake fencing panel size; 3000 × 1200 × 4mm light brown recycled polypropylene panels
- Permanent snake fencing panel size; 3000 × 1200 × 5mm light brown recycled polypropylene panels
Snake Fencing Fitted Measurements
Snake fencing is installed 300mm vertically below ground, 825mm vertically above ground and supported with timber stakes (Optional).
Snake Fencing Fitting Description
The snake fencing panels are fitted either into a 300 × 50mm slit created by a V backed sub soiler or “wiz" plough pulled by a tractor or in a trench excavated using a chain trencher or mini digger. Alternatively, if necessary, the trench is dug by hand.
The preferred method of installing snake fencing for best results and most efficient fitment is the slitting method, where conditions suit. Once the snake fencing panels are sited the slit is closed up by driving back along the line of the fence with a tractor, vehicle or compacted by hand. This creates a total seal between the soil and snake fencing panels, which are fitted to the side of the trench nearest to the relevent population or the inside if a containment area. The snake fencing panels are overlapped by 50mm then secured by aluminium blind rivets along the overlap joint and supported by stakes. Snake fencing panels can be cut down or the overlap increased to allow for uneven ground or contours.
HERPETOSURE® snake fencing is designed to be reusable andrecyclable, it also has a high level of impact resistance, therefore offering a much higher level of boundary security and removing the need to landfill expired fencing materials at the end of the project. ZERO project waste.
|Snake Fencing Technical Data|
|Tensile strength (Mpa)||N/mm2||26.0|
|Elongation at break||%||460|
|Flexural yield strength (Mpa)||N/mm2||42.0|
|Flexural modulus (Mpa)||N/mm2||1250|
|Linear Thermal expansion||mm/m/°c||0.150|
|Surface spread of flame||Class 3|